Ebulab 7kw/11kw/20kw Electric Vehicle Charging Station for Home Use with Ocpp

• Number of Charging Interfaces: One Pile with One Charge
• Location: Both Home Use and Publicj Use
• Installation: Wall Mount & Floor Mount
• Charge Method: Quick Charge
• Transport Package: Carton
• Model NO.: 7Kw/11Kw/20Kw
• Production Capacity: 50000PCS/Year

Product Description

Charging mode

Conformed to EN IEC 61851-1:2019

Charging mode:

method for connection of an EV to the supply network to supply energy to the

vehicle

The Charging mode of EMN series product is Mode 3

Mode 3 is a method for the connection of an EV to an AC EV supply equipment

permanently connected to an AC supply network, with a control pilot function that

extends from the AC EV supply equipment to the EV.

Charging connection

According to EN IEC 61851-1:2019, EMN series with tethered Type 2 cable meet the

Case C connection

Case C:

Connection of an EV to a supply network utilizing a cable and vehicle connector

permanently attached to the EV charging station.

Fig. 3-1 Schematic diagram of CASE B connection

According to EN 17186 requirement, this document lays down harmonized

identifiers for power supply for electric road vehicles. The requirements in

this standard are to complement the informational needs of users

regarding the compatibility between the EV charging stations, the cable

assemblies and the vehicles that are placed on the market. The identifier

is intended to be visualized at EV charging stations, on vehicles, on cable

assemblies, in EV dealerships and in consumer manuals as described.
 

Charging interface

According to EN IEC 61851-1:2019, EMN series with tethered Type 2 cable meet the

Case C connection

Electrical Specification
Input Voltage/Output voltage	100V /250V
Input frequency	47~63Hz
Max. output power	3.5KW (Single Phase)
Max. output current	16A
Charging interface type	IEC 62196-2
Function and Accessory
Ethernet/WIFI/4G/Bluetooth	No
LCD	3.5-inch color display
RCD	Type A / Type A+ 6mA DC
LED Indicator light	Yes
Intelligent power adjustment	Yes
RFID	Opt
APP	Opt
Working Environment
Protection degree	IP 66
Environment temperature	-40ºC ~ +80ºC
Relative humidity	0-95% non-condensing
Maximum altitude	<2000m
Cooling	Natural air cooling
Standby power consumption	<8W